No. 1/60
Measurements
- Additional height from bumpon: 1.75mm
- Bumpon itself: 8mm in diameter (SJ5302* or SJ5376 can work)
- 294.3mm (L) x 111mm (W) x 20.35mm (FH) x 35.8mm (RH)
*Not confirmed by Keycult yet
Weights
- Alu/Alu assembled w/ key caps - 2lbs 12 oz / 1.25kg
- Alu/Brass - Unbuilt - 4lbs 5oz / 1.96kg
Variations
Limited to sales, commission colors are not listed
- Light Grey
- Dusty Blue
- Dark Grey
- Brass
- Black
- Dusty Blue
- Silver
- Brass
- Red
- Teal
- E-White
- Brass
- Red
- Teal
- Black
Black/black vickrey editions were shelved.
There were also some OG B stock 1/60/65s offered in cerakote. Their colorways are unique to each serialized board and can be found here.
Layout Options
No. 1/65
Measurements
- Additional height from bumpon: 1.75mm
- 313.4mm (L) x 111mm (W) x 20.35mm (FH) x 35.8mm (RH)
Weights
- Alu/Alu - Unbuilt - 2lbs 8.5oz / 1.15kg
- Alu/Brass - Unbuilt - 4lbs 8.25oz / 2.05kg
Variations
Limited to sales, commission colors are not listed
- Light Grey
- Dusty Blue
- Brass
- Dark Grey
- Silver
- Brass
- Black
- Silver
- Brass
- Red
- Teal
- Gold
- E-White
- Brass
- Red
- Teal
- Black
- Rose Gold
- Charcoal
- Green
- Black
Black/black vickrey editions were shelved.
There were also some OG B stock 1/60/65s offered in cerakote. Their colorways are unique to each serialized board and can be found here.
Layout Options
Changelog
No. 1/60 and 1/65 Rev. 1
Much like the TKL release in June, this release is a revision to the original. While the plates are compatible, no other case components are. We’ve taken the lessons learned from a year of designing and producing keyboards and wrapped them up in this revision. Changes include:
- PTFE plate-alignment pins
- Leaf-spring plate for added flex
- VIA-compatible WT60-A and USB-C daughterboard designed by Wilba
No. 1/65 Rev. 1 Build Guide
Click the pic for an album. :D
